Rockwell Automation 20Y PowerFlex Active Front End - Manual (Page 64)

64 Rockwell Automation Publication 20Y-UM001E-EN-P - July 2014
Chapter 2 AFE in IP21 Rittal Enclosure—Installation/Wiring
Figure 28 - X3 Terminal Block Location for AFE in IP21 Rittal Enclosure
2. Move the wire shown in Figure 29 to the appropriate X3 terminal to
match the AC line voltage.
Figure 29 - Input Voltage Setting for Control Voltage on Frames 10 and 13 in IP21 Rittal
Enclosure
Frame 10
(Shown with enclosure doors removed)
Frame 13
(Shown with enclosure doors removed)
X3 Terminal
Block Location
X3 Terminal
Block Location
FRONT VIEW FRONT VIEW
400
X3 T
erminal
Block
440 460 480 500 525
X3 T
erminal
Block
600 690
For 400/480V AC Input For 600/690V AC Input
Move this wire to the
terminal that matches
the AC line voltage. Move this wire to the
terminal that matches
the AC line voltage.