Rockwell Automation 1771-DA,D17716.5.13 U MNL 1771-DA ASCII I/O MODULE User Manual
Page 11
Getting Started with Your ASCII Module
Chapter 2
2Ć4
Figure 1.1
Connections for MiniĆPLCĆ2/l5 Controller
Module Group 1,
Slot 1
Mini-PLC-2/15
Processor
1771-P1
Power Supply
1771-A1, -A2, -A4
I/O Chassis
1771-DA ASCII
I/O Module
1771-CL
Power Cable
1772-TC
Processor Interface Cable
1770-CB IT/DH
Adapter Cable
1770-T3
Industrial Terminal
(rear view)
Channel A
Channel B
11817
See WARNING in section titled How
to Connect Your Equipment." Using Channels
A & B
1.
Connect the power cable between the power supply and the I/O
chassis. The cable connects to the backplane of the I/O chassis
behind the processor/adapter slot.
2.
Connect the processor interface cable between the PC processor and
channel A on the industrial terminal.
3.
Connect the IT/DH adapter cable between the ASCII module and
channel B on the industrial terminal.