Rockwell Automation 1771-DA,D17716.5.13 U MNL 1771-DA ASCII I/O MODULE - Manual (Page 54)

Choosing Module Features
Chapter 3
3Ć12
Setting and Recording Initialization Words
The remaining features are configured by using initialization words.
These words are write block transferred to the module at power-up or
upon command. You will record your selections of module features by
writing codes (0 or 1) for corresponding initialization bits. You can do
this with either of the initialization word forms at the end of this chapter.
Use one form for data mode operation of the module, the other form for
report generation mode of operation. These modes of operation are
described next in this chapter. You can also record your selections in the
space provided in the text that describes each module feature. Then, at
the end of the chapter, you will be asked to rewrite the codes onto the
appropriate initialization word form. You will use this information in
chapter 4 when you demonstrate module features.