Rockwell Automation 1771-DA,D17716.5.13 U MNL 1771-DA ASCII I/O MODULE - Manual (Page 42)

Getting Started with Your ASCII Module
Chapter 2
2Ć35
BRADLEY 12345
at the upper left corner of the screen.
3. Reset the bit using the PLC-3 front panel.
Press 0 [ENTER]
4. Terminate the display and return to ladder diagram by connecting the
1770-CB cable to channel B, and entering the following keystrokes
on the industrial terminal keyboard.
Press [SHIFT][MODE]1
Summary
Now that you have demonstrated how data is transferred from your ASCII
device to the data table and vice versa, you are ready to use these
procedures further. Next, read “Choosing Module Features,” Chapter 2.
It will define key words and concepts. Then, in Chapter 3, “ASCII
Tutorial,” you will use these procedures to demonstrate operating
characteristics of your module.