Rockwell Automation 2706 DL40 HARDWARE USER MANUAL User Manual
Page 135
Advertising
![background image](/manuals/580513/135/background.png)
Chapter 11
Installation and Wiring
11 – 14
Figure 11.15
The Power Connector
VAC
HOT
NEU
E
GND
CHA
GND
Jumper is installed at
the factory. It can be
removed to meet your
requirements.
Black
White
Green
Note: Make certain all DIP switch settings are in the correct position before
the DL40 is powered up. See Chapter 12 for the correct DIP switch settings.
Advertising