Rockwell Automation 2706 DL40 HARDWARE USER MANUAL - Manual (Page 16)

Chapter 2
Introduction to the DL40
2 – 3
Figure 2.1
Easy to understand, menu–driven interface that helps guide you through the program
Create Message editing screen Set Message Attributes window
Convert DL20 files for use with a DL40 Download Message Files screen
PLC-5 Remote I/O PassThrough Via DH+
PLC-5 Remote I/O PassThrough allows you to upload and download
message files from a computer to a DL40 connected by remote I/O to a
programmable Logic Controller on the DH+ link. There is no need to
connect separate wiring from the computer to the DL40. PassThrough is
available only on Series D or higher DL40 message displays. A summary of
compatible PLCs appears on page 2 – 11.