Rockwell Automation 2706 DL40 HARDWARE USER MANUAL - Manual (Page 152)

Chapter
13
Chapter 13
Specifications
Figure 13Table 13
13 – 1
Chapter 12
Specifications
Display Characters
Character Height
Two line display
Four line display 0.45 inch (11.55 mm)
0.44 inch (11.3 mm)
Character Set Standard & Extended
ASCII Character Set
Characters Per Line 20
Character Type Vacuum fluorescent, dot matrix (VFD)
Approximate Viewing Distance
Two line display
Four line display 25 feet (7.6 meters)
25 feet (7.6 meters)
Electrical
Input Voltage 85–264 VAC
Input Power 45 VA max. at 85 VAC
Fuse Type
USA
European
1.25 amperes, 250 volts AC, Type MDL
1.5 amperes, 250 volts AC, Type GMC
PLC Controller Remote I/O Communications
Allen–Bradley Programmable Controller via
Allen–Bradley 1771 Remote I/O Link and 1747-SN module
Remote I/O Baud Rate 57.6K, 115.2K, or 230.4K
Maximum I/O Cable Distance 10,000 feet (2800m) for 57.6K baud
5000 feet (1400m) for 115.2K baud
2500 feet (700m) for 230.4K baud
Rack Sizes 1 /
4
, 1 /
2
, 3 /
4
or 1 (any starting module)
Supports discrete I/O and block transfers
Serial Communications Ports
Type RS–232, RS–485
Baud Rate 300, 1200, 2400, 4800, 9600,19200
Parity (send only) Odd, even, or none
Data Bits/Character 7 or 8