Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) Commissioning - ForGe Control - Manual (Page 133)

Rockwell Automation Publication 7000-IN012B-EN-P - June 2014 133
Appendix
C
History of Changes
This appendix summarizes the revisions to this manual. Reference this appendix
to determine what changes have been made across multiple revisions.
7000-IN012A-EN-P,
May 2013
Change
Removed all PanelView 550 content
Linked referenced documents to Literature Library
Changed sample waveform images to white background
Built all equations using appropriate tools
Updated Operator Interface section to reflect new HMI
Inserted UPS/battery option
Consolidated resistance checks section
Added Snubber Circuit for SGCT schematic with SPS
Inserted all PowerCage drawings with and without SPS installed
Added SGCT PowerCage drawings showing SPS and heat pipe test points
Added Snubber Resistor drawings showing SPS
Added Snubber Capacitor drawings showing SPS
Replaced Control Power schematic
Inserted new Cosel Power Supply images
Updated all cabinet drawings to reflect SPS boards
Inserted heat pipe converter cabinet graphics
Inserted IGDPS Board LED test point table
Inserted SPS Board LED test point table
Updated Gating Test section for new HMI
Added labels on SCR SPGDB Boards
Updated System Test section for new HMI
Updated Analog I/O section
Changed 18 Pulse section to accommodate new HMI
Insert Save and Retrieve information
Changed DC Current Test to use new HMI
Updated Tuning procedure using the new HMI
Updated Input Impedance Manual Tuning procedure
Added Leakage Inductance footnote
Changed Speed Regulator Manual Tuning (Induction Motor) for new HMI
Changed Total Inertia Calculations for clarity
Switched all references from Tachometer to Encoder
Updated and reformatted all Specifications
Added Index