Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) Commissioning - ForGe Control - Manual (Page 84)

84 Rockwell Automation Publication 7000-IN012B-EN-P - June 2014
Chapter 4 Commissioning the Drive
Figure 66 - Search Dialog
Parameters are not plotted by default. To plot the parameter, select the desired
trace and click Plot. Click Plot again to remove the trace from the plot.
Diagnostic Trigger
The trigger variable is based on the first trace parameter.
The trigger type is defined by the drive as:
• Single - the capture is triggered once and must be manually armed again for
an additional trigger, or
• Continuous - the capture is re-armed each time the drive starts or when
manually re-armed.
The trigger condition is set from a pulldown menu and consists of:
The value the trigger condition is being applied to is entered by selecting the data
field and then clicking on the Soft Keypad Icon.
Greater than > AND &
Less than < NAND N&
Equal to = OR +
Not Equal to != NOR N+