Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) Commissioning - ForGe Control - Manual (Page 85)

Rockwell Automation Publication 7000-IN012B-EN-P - June 2014 85
Commissioning the Drive Chapter 4
Depending on the type of parameter assigned to trace 1, the following dialogs are
possible:
• Value Parameter - Enter the value in the Soft Keypad dialog.
• Binary Parameter - a dialog shown in
Figure 67 will be displayed to help
compose the hexadecimal value. Check the applicable options and click
OK.
Figure 67 - Binary Trigger Parameter
• Enum Parameter - A dialog ( Figure 68 ) provides a list of possible values.
Select the desired value and click OK.
Figure 68 - Enum Trigger Parameter
The Post Sample value can be set from 0...99%. To adjust the value:
1. Select the Post Sample field and click the Soft Keypad Icon.
2. Enter the desired value in the Soft Keypad dialog.
Alternatively, a keyboard can be used to type directly into the field.
3. Click OK to accept.