Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) Commissioning - ForGe Control User Manual
Page 26
26
Rockwell Automation Publication 7000-IN012B-EN-P - June 2014
Chapter 3 Commissioning Preparations
1.
All checklists and tables in this document (commissioning checklist,
customer data, motor data, daily service summary, etc.)
2.
Harmonics waveforms must be captured on AFE drives under drive-not-
running and full-load conditions.
3.
DC current test waveforms (dc voltage and dc current) and variables while
running DC test
4.
Load Test waveforms (line and load voltage and current waveforms at 50%
and 100% load or whatever maximum load and speed allowed by the
customer)
5.
Final drive parameter settings and variables (running motor at max speed
and load)
6.
Modified PLC program (if applicable)
7.
Synchronous transfer waveforms (for synchronous transfer applications)
8.
Starting with and without load profile (for conveyor applications)
9.
Marked-up drawings
10.
Summary of issues/failures encountered during commissioning
All documents and data files (waveforms, parameter settings, variables, trend data,
etc.) intended for submission must be properly named, labeled and organized.
IMPORTANT
If the commissioning datasheets submitted by the commissioning engineer are
incomplete and/or the required commissioning data, such as harmonic
waveforms, dc test waveforms, sync xfer waveforms etc, are not captured
correctly or the required data is missing, then it can delay the processing of
expense invoices submitted by the engineer.
IMPORTANT
While the Field Service Engineer (FSE) is still at the site, he MUST send the
following information to MV Tech Support for review via e-mail at
[email protected]:
• Drive setup after completing the auto-tuning
• Drive variables captured in running condition (at load or no load or
uncoupled or with load)
• Line voltage and line current waveforms for harmonics on AFE drives when
drive is energized
• Black Box Data before leaving the site, followed by instructions on relevant
Tech Note.