Rockwell Automation GMLC Reference Manual - Manual (Page 183)

Publication GMLC-5.2 - November 1999
146 Working with Blocks
1. Place your cursor over one block in the diagram.
2. Double-click your left mouse button. The selected block’s dialog box
appears.
3. Examine or change the parameters that have been set for the function
block.
Accessing from the Edit menu
1. Select a block.
2. From the menu bar, select Edit. The Edit menu appears.
3. Select Block Information. The dialog box for that block appears.
4. Examine or change the parameters that have been set for the function
block.
For additional information about specific blocks see the chapter that
contains that type of block. The block chapters have been broken up
according to the blocks general class of operation. The general classes of
operation are:
• Control setting blocks
• Motion blocks
• I/O and event blocks
• Program control blocks
• Multitasking blocks
• Status blocks
• AxisLink blocks
• RIO blocks
• CNET blocks
• DH-485 blocks
• SLC blocks