Rockwell Automation GMLC Reference Manual User Manual
Page 672
Publication GMLC-5.2 - November 1999
Motion Controller Functions
635
This system function returns a numeric value based upon the configured
Flex IO module installed at the specified module location (0 to 7) as
shown in following table:
Master Cam Position
Use the
Master_CAM_position function to store a master axis position in
the cam table, or use it as an element in an expression.
You use the Build Table or Equation block to build position cam master
tables. It is not necessary to use this function for this purpose.
Syntax:
Master_Cam_position[PCAM master point]
After you select an axis from the pop-up menu, insert a value or
expression equal to the desired position cam table master point for the
argument. The argument is evaluated as an integer (floating-point values
are truncated) and must have a value from:
Flex I/O Module Type
Module Type Number
1794-IB16
10
1794-IE8
11
1794-IAS
12
1794-IF41
13
1794-OB16
64
1794-OE4
65
1794-OA8
66
1794-OW8
67
1794-0B16P
68
1794-IE 4XOE2
128
1794-IB10XOB6
129