Defining inputs and outputs, Defining the i/o configuration – Rockwell Automation GMLC Reference Manual User Manual
Page 819
Publication GMLC-5.2 - November 1999
782
1394 GMC Turbo SLC Interface
Defining Inputs and Outputs
After you have enabled the SLC interface (see Enabling the SLC Interface
in GML Commander), you need to define:
•
I/O configuration
•
Input bits
•
Input floats (floating point variables)
•
Input group bits
•
Output bits
•
Output floats (floating point variables)
•
Output group bits
Defining the I/O Configuration
To define the I/O Configuration:
1. From the menu bar, select Configure. The Configure menu appears.
2. Select Control Options. The Configure Control Options dialog box
appears.
3. Select the SLC tab. The SLC page appears.
Note: If no SLC tab appears, on the General page of the Control
Options dialog box, select IMC S Class 1394/1394 Turbo in
the Control Type field, 3.5 (or higher) in the iCODE Version
field, and the SLC field in the Interface area (see Enabling the
SLC Interface in GML Commander). Then select the SLC
tab.