Rockwell Automation GMLC Reference Manual - Manual (Page 615)

Publication GMLC-5.2 - November 1999
578 Status Variables
Gearing Status
Gearing_status is a logical (Boolean) variable which has values of:
• 1 (true) if electronic gearing is active for the axis
• 0 (false) if not
In the Tag Explorer, select both Axis System Variables and the desired
physical or imaginary axis, then select Gearing_status in the Tag Window.
Gearing is activated by a Gear Axes block and stopped by a Disable
Gearing or Stop Motion block.
When Gearing_status = 1, Axis_status
≤
5 if no faults are active on the
axis.
Registration Status
Registration_status is a logical (Boolean) variable which has values of:
• 0 (false) after a registration event has been set up and before the
registration event occurs
• 1 (true) after the registration event occurs
In the Tag Explorer, select both Axis System Variables and the desired
physical or virtual axis, then select Registration_status in the Tag
Window.
The value of the Registration_status variable indicates whether a
previously set up registration event for the axis has occurred.