Rockwell Automation SB3000 Configuration and Programming - Manual (Page 16)

2-6 SB3000 Drive Configuration and Programming
2.2.2 PMI Meter Port Selection
PMI Meter ports 1 and 2 are dedicated to driving two standard meters supplied with
the SB3000 Rectifier. Meter port 1 drives the DC bus output current meter. Meter port
2 drives the AC input current meter. Meter ports 3 and 4 are not used on standard
SB3000 systems, but can be programmed to operate custom display meters. See
figure 2.2.
A DC bus voltmeter is hardwired directly to the SB3000 DC bus output terminals.
Figure 2.2 – PMI Meter Port Selection Screen