Bio-Rad BioLogic LP System - Manual (Page 46)

39
System Operation
Table 7. (continued)
Manual Mode Operation: Fraction Collector
Reference Description
Start/Stop screen: This first softkey in the Main Menu screen
allows you to start/stop the fraction collector.
•
Pressing Stop stops the fraction collector.
• Pressing FX Size allows you to change the fraction size.
• Pressing Advance causes the fraction collector to advance
to the next tube.
• Pressing Model allows you to specify the type of Fraction
Collector being used.
When the fraction collector is running, its status light is ON.
Method: <<name>> Manual Operation
Fx Size: 1.00 mil UV: 0.0111 AU
Diverting to Waste Cond: 0.000 mS
STOP F/X SIZE ADVANCE MODEL
M1
M2 M2 M3 M4
MF
Method: <<name>> Manual Operation
Fx Size: 1.00 ml UV: 0.0111 AU
Diverting to Waste Cond: 0.000 mS
START
F/X SIZE ADVANCE MODEL
STOP F/C Advance F/C
fraction size
set as volume
(return to MF)
(return to MF) (return to MF)
fraction size
changes from
Volume to Time
Method: <<name>> Manual Operation
Fraction Size: 1.00 ml
Collection Units: Volume
TIME (volume) CANCEL OK
Select Fraction Collector
Current model: 2110
2128 2110 OTHER CANCEL
(return to MF)
MF
M1
M2
M3
M4
MF MANUAL MODE: FRACTION COLLECTOR
SET FRACTION SIZE
SELECT MODEL NUMBER
M2
M4
LEGEND
Figure 16. Manual Operation of the Fraction Collector
(Screen displays are keyed to the discussion in Table 7, Manual Mode Operation : Fraction Collector)