Bio-Rad BioLogic LP System - Manual (Page 64)

Table 15. (continued
Program Mode Operation: Viewing and Editing a Method
Reference Description
Save As... screen: This screen provides a number of options.
•
Replace: This replaces the previous version of a method
with the newly modified method. In this case the previous
version is permanently lost.
• New Name: This allows the modified method to be saved
using a new name. In this case both the original method
and the modified method with a different name are saved.
• No Save: This allows the method to remain the current
method and for it to be run without saving it in permanent
storage. This option is typically used when a method will
never be repeated or when 50 methods are already stored
in permanent memory. Methods which are not saved will
always be named “<untitled>”.
Note: The “<untitled>” method loaded as the current
method is not lost when the power is shut off and remains
the current method when power is restored.
• Cancel: This gives the option to abandon the changes or
additions to the original method and revert to the method as
it was before. There will be a confirmation screen with a
Yes/No choice to prevent accidental loss of the modified
method if this key is pressed unintentionally.
57
System Operation
Method: name Time: 2.00 min
Replace existing method with this name,
use a new name, or use without saving?
REPLACE NEW NAME NO SAVE CANCEL
(refer to
section 5.3.7)