Bio-Rad BioLogic LP System - Manual (Page 82)

5.3.7 Entering Method Names
Since up to 50 methods can be stored in the BioLogic LP, method names are necessary to keep track of the
methods stored. Method names consist of up to 12 characters and can include upper case letters (A-Z),
numbers (0-9), and spaces. Careful selection of names makes it easier to retrieve the method desired. In
Manual and Run modes the name of the current method will be on the top line of the LCD as a reminder.
Note: The List of Methods used to retrieve stored methods is displayed in alphabetical order.
Table 23.
Program Mode: Entering Method Names
Reference Description
Method Name Entry screen: This screen allows method
names to be entered. The underscore shown within the method
name on the top line is the insertion point where the next char-
acter will be placed. The insertion point can be moved using
the Prev and Next keys.
To enter a letter character, select the softkey which shows the
range containing the desired letter followed by the number key
indicated after selecting the range. To enter a number, press
the number key directly. Use the decimal (.) key to place a
space in the name.
Line 2 of the LCD displays the current function of each number
key. Press the Done soft key to return to the List of Methods
after the name has been entered.
Note: The bottom picture shows that after a letter range has
been selected the Done softkey is replaced by a 0-9 softkey
which can be used to cancel the range selection.
75
System Operation
Enter Method name: [ION EXCH 12_]
0 – 9 for digits, " . " for SPACE, or
Select character group below:
A-J K-T U-Z DONE
L2
(Displays the characters
within the indicated range)
(finishes
name entry)
A letter range has
not been selected.
L2
Enter Method name: [ION EXCH 12_]
A=1 B=2 C=3 D=4 E=5 F=6 G=7 H=8 I=9 J=0
Use SOFT keys to change character groups
A-J K-T U-Z 0 - 9
L2a
(Displays the characters
within the indicated range)
Letter range A-J has
been selected.