Bio-Rad BioLogic LP System User Manual
Page 87
5.4.2.1 Information Available During a Run
There are two screens of information available ring a run which are described in Table 25.
Table 24.
Run Mode: Information Available During a Run
Reference
Description
Run Screen: This displays the most important run information.
The method name and the elapsed time or volume are shown
on the top line of the LCD. The left side of the LCD shows the
Pump and Fraction Collector status, and the right side of the
LCD shows the UV Monitor and the Conductivity Monitor sig-
nals.
•
Run Status: This displays the Run Status screen described
below.
•
Hold: This places the run on Hold. For a description of
Holding a Run see section 5.4.2.2 below.
•
Pause: This Pauses the run. For a description of Pausing a
Run see section 5.4.2.3 below.
•
Stop Run: This stops the run without finishing the pro-
grammed method. To prevent accidentally stopping a run,
there is a Yes/No confirmation screen after pressing this
softkey.
Run Status Screen: The elapsed time or volume in the run
and the total time or volume of the run are shown on line 1 of
the LCD. The current pump step, the total number of steps in
the method, and the end time or volume for the current step are
shown on line 2. The fraction collector status is shown on line
3. The information provided depends upon the fraction collec-
tion mode programmed in the method:
•
Collect All: the fraction size
•
Threshold: the threshold setting and whether the current
UV Monitor signal is above or below the threshold
•
Collection Windows and Threshold plus Collection
Windows:
-
Inside a Window: the current window number, the
total number of windows in the method, and the end
time or volume for the current window
-
Outside All Windows: the next window number and
when it will start
80
System Operation
R2
Method: name
Volume: 0.51 ml
Pump:
1.00 ml/min A
UV:
0.0208 AU
Frac:
(Collecting)
Cond:
0.00 mS
RUN STATUS
HOLD
PAUSE
STOP RUN
(Continue)
(Resume Run)
(confirm
message)
R2a
R2b
R2c
R2a
Run Time: 3 ml
End:
15 ml
Pump:
Step 1 of 5
End:
5 ml
Frac:
Collect All
Size:
1 ml
RUN SCREEN
(returns
to R2)