Debug ip dhcp client events, Debug ip dhcp client packets – Dell PowerEdge FX2/FX2s User Manual
Page 113
Command
Modes
EXEC Privilege
Default
None
Command
History
Version 9.4(0.0)
Supported on the FN I/O aggregator.
debug ip dhcp client events
Enable the display of log messages for the following events on DHCP client interfaces:
• IP address acquisition
• IP address release
• Renewal of IP address and lease time
• Release of an IP address
Syntax
debug ip dhcp client events [interface type slot/port]
Parameters
interface type
slot/port
Display log messages for DHCP packets sent and received on
the specified interface.
• For the management interface on the stack-unit, enter
the keyword managementethernet followed by slot/
port information. The slot and port range is 0
• For a VLAN, enter the keyword vlan followed by a
number from 1 to 4094.
Command
Modes
EXEC Privilege
Default
None
Command
History
Version 9.4(0.0)
Supported on the FN I/O aggregator.
debug ip dhcp client packets
Enable the display of log messages for all DHCP packets sent and received on DHCP client interfaces.
Syntax
debug ip dhcp client packets [interface type slot/port]
113