Dell PowerEdge FX2/FX2s - Manual (Page 195)

• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
vlan vlan-id Enter the keyword vlan followed by a VLAN ID number from
1 to 4094.
Command
Modes EXEC Privilege
Usage
Information This command is not available in Standalone mode.
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
description
Add a description about the selected VLAN.
Syntax description description
To remove the description from the VLAN, use the no description command.
Parameters
description Enter a text string description to identify the VLAN (80
characters maximum).
Defaults none
Command
Modes INTERFACE VLAN
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Related
Commands show vlan – displays the VLAN configuration.
show cam mac stack-unit
Display the content addressable memory (CAM) size and the portions allocated for MAC addresses and
for MAC ACLs.
Syntax show cam mac stack-unit unit_number port-set port-pipe count
[vlan vlan-id] [interface interface]
195