Dell PowerEdge FX2/FX2s - Manual (Page 297)

Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
clear ets counters
Clear ETS TLV counters.
Syntax clear ets counters [tengigabitethernet slot/port]
Parameters
slot/port Enter the slot/port number.
Command
Modes
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
clear pfc counters
Clear the PFC TLV counterson an interface or stack unit.
Syntax clear pfc counters [tengigabitethernet slot/port | [stack-unit
{unit-number | all} stack-ports all]]
Parameters
slot/port Enter the slot/port number.
stack-unit unit
number Enter the keywords stack-unit then the stack-unit number
to clear. The range is from 0 to 5.
all stack-ports
all Enter the keywords all stack-ports all to clear the
counters on all interfaces.
Defaults None
Command
Modes
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
dcb-enable
Enable data center bridging.
Syntax dcb enable
To disable DCB, use the no dcb enable command.
Defaults none
Command
Modes CONFIGURATION
297