Dell PowerEdge FX2/FX2s - Manual (Page 204)

Related
Command
show monitor session — Displays the monitor session.
show running-config monitor session — Displays the running configuration of a
monitor session.
show config
Display the current monitor session configuration.
Syntax show config
Defaults none
Command
Modes MONITOR SESSION (conf-mon-sess-session-ID)
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell(conf-mon-sess-5)#show config
!
monitor session 5
source TenGigabitEthernet 0/4 destination TenGigabitEthernet
0/7 direction rx
Dell(conf-mon-sess-5)#
show monitor session
Display the monitor information of a particular session or all sessions.
Syntax show monitor session {session-ID}
To display monitoring information for all sessions, use the show monitor
session command.
Parameters
session-ID (OPTIONAL) Enter a session identification number. The range
is from 0 to 65535.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
204