Dell PowerEdge FX2/FX2s - Manual (Page 203)

description
Enter a description of this monitoring session.
Syntax description {description}
To remove the description, use the no description {description}
command.
Parameters
description Enter a description regarding this session (80 characters
maximum).
Defaults none
Command
Modes MONITOR SESSION (conf-mon-sess-session-ID)
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Related
Commands
monitor session — enables a monitoring session.
monitor session
Create a session for monitoring traffic with port monitoring.
Syntax monitor session session-ID
To delete a session, use the no monitor session session-ID command.
To delete all monitor sessions, use the no monitor session all command.
Parameters
session-ID Enter a session identification number. The range is from 0 to
65535.
Defaults none
Command
Modes CONFIGURATION
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information The monitor command is saved in the running configuration at Monitor Session
mode level and can be restored after a chassis reload.
Example
Dell(conf)# monitor session 60
Dell(conf-mon-sess-60)
203