Show interface management ethernet, Show interface management port config – Dell PowerEdge FX2/FX2s User Manual
Page 93

Command
Modes
• uBoot
Command
History
Version 9.4(0.0)
Supported on the FN I/O aggregator.
Example
BOOT_USER # show default-gateway
Gateway IP address: 15.0.0.1
BOOT_USER #
show interface management ethernet
Show the management port IP address and mask.
Syntax
show interface management ethernet
Command
Modes
• uBoot
Command
History
Version 9.4(0.0)
Supported on the FN I/O aggregator.
Example
BOOT_USER # show interface management ethernet
Management ethernet IP address: 10.16.130.134/16
BOOT_USER #
show interface management port config
Show the management port boot characteristics.
Syntax
show interface management port config
Command
Modes
• uBoot
Command
History
Version 9.4(0.0)
Supported on the FN I/O aggregator.
Example
BOOT_USER # show interface management port config
Management ethernet Port Configuration: no Auto Negotiate
Management ethernet Port Configuration: 100M
Management ethernet Port Configuration: full duplex
BOOT_USER #
93