Dell PowerEdge FX2/FX2s - Manual (Page 412)

This is the banner
Dell>
Related
Commands
exec-banner — enables the display of a text string when you enter EXEC mode.
debug radius
View RADIUS transactions to assist with troubleshooting.
Syntax debug radius
To disable debugging of RADIUS, use the no debug radius command.
Defaults Disabled.
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
debug tacacs+
To assist with troubleshooting, view TACACS+ transactions.
Syntax debug tacacs+
To disable debugging of TACACS+, use the no debug tacacs+ command.
Defaults Disabled.
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
exec-banner
Enable the display of a text string when the user enters EXEC mode.
Syntax exec-banner
To disable the banner on terminal lines, use the no exec-banner command.
Defaults Enabled on all lines (if configured, the banner appears).
Command
Modes LINE
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information Optionally, use the banner exec command to create a text string that is displayed
when you access EXEC mode. This command toggles that display.
412