Interface range – Dell PowerEdge FX2/FX2s User Manual

Page 139

Advertising
background image

interface range

This command permits configuration of a range of interfaces to which subsequent commands are
applied (bulk configuration). Using the interface range command, you can enter identical commands for

a range of interface.

Syntax

interface range interface, interface,...
To delete a description, enter no description command.

Parameters

interface,
interface,...

Enter the keyword interface range and one of the interfaces
— slot/port, port-channel or VLAN number. Select the range
of interfaces for bulk configuration. You can enter up to six
comma separated ranges—spaces are not required between
the commas. Comma-separated ranges can include VLANs,
port-channels and physical interfaces.
Slot/Port information must contain a space before and after
the dash. For example, interface range
tengigabitethernet 0/1 - 5 is valid; interface
range tengigabitethernet 0/1-5 is not valid.

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet followed by the slot/port

information.

• For a VLAN, enter the keyword vlan followed by a

number from 1 to 4094.

Defaults

none

Command
Modes

CONFIGURATION

Command
History

Version 9.4(0.0)

Supported on the FN I/O aggregator.

Usage
Information

When creating an interface range, interfaces appear in the order they are entered;
they are not sorted. The command verifies that interfaces are present (physical) or
configured (logical). Important things to remember:

• Bulk configuration is created if at least one interface is valid.
• Non-existing interfaces are excluded from the bulk configuration with a

warning message.

• The interface range prompt includes interface types with slot/port information

for valid interfaces. The prompt allows for a maximum of 32 characters. If the
bulk configuration exceeds 32 characters, it is represented by an ellipsis ( ... ).

• When the interface range prompt has multiple port ranges, the smaller port

range is excluded from the prompt.

• If overlapping port ranges are specified, the port range is extended to the

smallest start port and the biggest end port.

139

Advertising