Dell PowerEdge FX2/FX2s - Manual (Page 132)

Interface Lists the interface type, slot and port
number.
Mode Displays the IGMP version used.
Uptime Displays the amount of time the group
has been operational.
Expires Displays the amount of time until the
entry expires.
Last Reporter Displays the IP address of the last host
to be a member of the IGMP group.
Member Ports Indicates the member ports of the port
channel. If the port channel is VLT, an
asterisk (*) after the port channel
number indicates the port channel is
locally down and that a remote VLT
port is up.
show ip igmp interface
View information on the interfaces participating in IGMP.
Syntax show ip igmp interface [interface]
Parameters
interface (OPTIONAL) Enter any of the following keywords and slot/
port or number to clear counters from a specified interface:
• For a Port Channel interface, enter the keyword port-
channel followed by a number. Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a VLAN, enter the keyword vlan followed by a number
from 1 to 4094.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell#show ip igmp interface
Vlan 2 is up, line protocol is down
Inbound IGMP access group is not set
Interface IGMP group join rate limit is not set
IGMP snooping is enabled on interface
132