Rename, Restore factory-defaults – Dell PowerEdge FX2/FX2s User Manual
Page 37
Command
Modes
EXEC Privilege
Command
History
Version 9.4(0.0)
Supported on the FN I/O aggregator.
Example
Dell#pwd
flash:
Dell#
Related
Commands
rename
Rename a file in the local file system.
Syntax
rename url url
Parameters
url
Enter the following keywords and a filename:
• For a file on the internal Flash, enter flash:// then the
filename.
• For a file on an external USB drive, enter usbflash://
then the filename.
Command
Modes
EXEC Privilege
Command
History
Version 9.4(0.0)
Supported on the FN I/O aggregator.
restore factory-defaults
Restore factory defaults.
Syntax
restore factory-defaults stack-unit id {clear-all | nvram}
Parameters
factory-
defaults
Return the system to its factory default mode.
id
Enter the stack member unit identifier to restore the
mentioned stack-unit. The range is from 0 to 6. Enter the
keyword all to restore all units in the stack.
clear-all
Enter the keywords clear-all to reset the NvRAM and the
system startup configuration.
37