Checkline TI-MINIMAX - Manual (Page 128)

Dakota Ultrasonics
122
Adjusting the Width using the Tabbed Menus
1) Press the MENU key once to activate the menu items tab. Press the
MENU key multiple times to tab right, and the ESC key multiple times to
tab left, until the DISP menu is highlighted and displaying the submenu
items.
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until WIDTH is highlighted.
3) Press the LEFT and RIGHT arrow keys to scroll the value. When the
correct width is being displayed, proceed to step 8.
4) Alternatively , press the ENTER key to display the Digits Edit Box.
5) Press the UP and DOWN arrow keys to scroll the highlighted value.
6) Press the LEFT and RIGHT arrow keys to scroll the digit locations.
7) Repeat steps 5 & 6 until the Width value is correctly displayed.
8) Press the OK key to set the Width and return to the menu screen, or
ESC to cancel entering the Width.
9) Finally, press the MEAS key to return to the measurement screen.