Checkline TI-MINIMAX - Manual (Page 64)

Dakota Ultrasonics
58
25) Press the ENTER key and the length value currently being measured,
will appear in the ULTRASONIC LEN field.
26) Use the UP and DOWN arrow keys to scroll through the One Point
Zero List Items until CALC ZERO is highlighted.
27) Press the OK key to set the Zero Value and return to the menu screen,
or ESC to cancel entering the Zero Value. Notice the delay value has
been inserted in the Zero Value field.
28) Finally, press the MEAS key to return to the measurement screen and
begin taking readings.
Typically when the zero value is off and the hardware has not changed, it’s
because the temperature of the bolt has changed. In this case, the zero value