Checkline TI-MINIMAX - Manual (Page 171)

MINI-MAX Ultrasonic Bolt Tension Monitor
11) Press the OK to save the changes or the ESC key to cancel editing the
group parameters.
12) Press the MEAS key to return to the measurement screen.
14.7 Changing the active group (Open)
The user may have transferred group templates from a PC to the MINI-MAX, or
setup groups using the MINI-MAX at an earlier time. The name of the currently
active group is always displayed at the bottom of the
Hot Menu Items in
measurement mode. It’s not only important to recognize what grid is currently
active, but also be able to change the active grid at any time. The following
procedures outline this process:
Changing the Active Group
1) Press the MENU key once to activate the menu items tab. Press the
MENU key multiple times to tab right and the ESC key multiple times to
tab left until the DATA menu is highlighted and displaying the submenu
items.
2) Use the UP and DOWN arrow keys to scroll through the sub menu
items until OPEN is highlighted.
3) Press the ENTER key to display the Group List Box.
4) Use the UP and DOWN arrow keys to scroll through the groups until the
target grid is highlighted.
5) Press the ENTER key to activate the confirmation screen.