Checkline TI-MINIMAX - Manual (Page 89)

MINI-MAX Ultrasonic Bolt Tension Monitor
adding a manual step to the procedures. The semi automatic mode answers
requirements such as these.
Selecting Semi Automatic Temperature Mode
1) Press the MENU key once to activate the menu items tab. Press the
MENU key multiple times to tab right, and the ESC key multiple times to
tab left, until the UTIL menu is highlighted and displaying the submenu
items.
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until TEMP MODE is highlighted.
3) Use the LEFT and RIGHT arrow keys to scroll the temperature mode
options. Once the SEMI AUTO temperature mode is displayed.
4) Press the MEAS key once to activate measure menu items. Press the
MEAS key multiple times to move right, and the ESC key multiple times
to move left until the TEMP cell is highlighted.
5) Press the ENTER key to activate the Digits Edit Box and the
temperature will be displayed and active.
6) Press the OK key to accept the temperature and return to the
measurement screen, or ESC to cancel entering the TEMP.