Checkline TI-MINIMAX User Manual
Page 36
Dakota Ultrasonics
30
4.19 ON/OFF Key
The
ON/OFF key simply powers the unit either ON or OFF. Note: Unit will
automatically power off when idle for 5 minutes. All current settings are saved
prior to powering off.
4.20 Top & Bottom End Caps
The top & bottom end panels are where all connections are made to the MINI-
MAX. The diagram above shows the layout and description of the connectors:
Transducer Connector
Refer to Diagram: The transducer connector, temperature sensor (option), and
battery cover/probe zero disk are located on the MINI-MAX’s top end cap. The
transducer connector is of type Lemo “00”, and the temperature sensor
connector is of type Lemo 1 5 pin.
Probe Zero Disk & Battery Cover
Refer to Diagram: The Battery cover is the large round disk shown in the
diagram. Simply remove the cover when replacing the batteries (3 AA cells).
Important: Be sure to follow the polarity labels located on the back label of the
MINI-MAX. Note: Rechargeable batteries can be used, however they must be
recharged outside of the unit in a stand alone battery charger.