Interlogix NS3500-28T-4S User Manual - Manual (Page 102)

102
4.4.3 LAG Port Setting
This page allows setting configuration for per LAG. The LAG Port setting screens in Figure 4-4-6 & Figure 4-4-7
appear.
Figure 4-4-6 LAG Port Setting Information Page Screenshot
The page includes the following fields:
Object Description

LAG Select Select LAG number for this drop down list.
 Enable Indicates the LAGt state operation. Possible state are:
Enabled - Start up the LAG manually.
Disabled - Shutdown the LAG manually.
 Speed Select any available link speed for the given switch port. Draw the menu bar to
select the mode.

Auto - Setup Auto negotiation.

Auto-10M - Setup 10M Auto negotiation.

Auto-100M - Setup 100M Auto negotiation.

Auto-1000M - Setup 1000M Auto negotiation.

Auto-10/100M - Setup 10/100M Auto negotiation.

10M - Setup 10M Force mode.

100M - Setup 100M Force mode.

1000M - Setup 1000M Force mode.
 Flow Control When Auto Speed is selected for a port, this section indicates the flow control
capability that is advertised to the link partner.
When a fixed-speed setting is selected, that is what is used.