Interlogix NS3500-28T-4S User Manual - Manual (Page 227)

227
Figure 4-9-5 802.1X Port Setting Page Screenshot
The page includes the following fields:
Object Description
 Port Select port for this drop down list.
 Mode If NAS is globally enabled, this selection controls the port's authentication
mode. The following modes are available:

No Authentication

Authentication

Force Authorized
In this mode, the switch will send one EAPOL Success frame when
the port link comes up, and any client on the port will be allowed
network access without authentication.
 Force Unauthorized
In this mode, the switch will send one EAPOL Failure frame when the
port link comes up, and any client on the port will be disallowed
network access.
 Reauthentication
Enable
If checked, successfully authenticated supplicants/clients are reauthenticated
after the interval specified by the Reauthentication Period. Reauthentication for
802.1X-enabled ports can be used to detect if a new device is plugged into a