Interlogix NS3500-28T-4S User Manual - Manual (Page 301)

301
The page includes the following fields:
Object Description
 ACL Name Display the current ACL name
 Sepuence Display the current sequence
 Action Display the current action
 Protocol Display the current protocol
 Source IP Address Display the current source IP address
 Source IP Address
Wildcard Mask
Display the current source IP address wildcard mask
 Destination IP
Address
Display the current destination IP address
 Destination IP
Address Wildcard
Mask
Display the current destination IP address wildcard mask
 Source Port Range Display the current source port range
 Destiantion Port
Range
Display the current destination port range
 Flag Set Display the current flag set
 DSCP Display the current DSCP
 IP Precedence Display the current IP precedence
 ICMP Type Display the current ICMP Type
 ICMP Code Display the current ICMP code
 Modify
Click to edit IPv4-based ACL parameter.
Click to delete IPv4-based ACL entry.
4.10.5 IPv6-based ACL
This page shows the ACL status by different ACL users. Each row describes the ACE that is defined. It is a conflict if a
specific ACE is not applied to the hardware due to hardware limitations. IPv6-based ACL screens in Figure 4-10-9 &
Figure 4-10-10 appear.