Interlogix NS3500-28T-4S User Manual - Manual (Page 279)

279
The page includes the following fields:
Object Description
 Port Display the current port
 VLAN ID Display the current VLAN
 MAC Address Display the current MAC address
 IP Address Display the current IP Address
 Type Display the current entry type
 Lease Time Display the current lease time
 Action
Click to delete IP source guard binding table status entry.
4.9.10 Port Security
This page allows you to configure the Port Security Limit Control system and port settings. Limit Control allows for
limiting the number of users on a given port. A user is identified by a MAC address and VLAN ID. If Limit Control is
enabled on a port, the limit specifies the maximum number of users on the port. If this number is exceeded, an action
is taken. The action can be one of four different as described below.
The Limit Control module is one of a range of modules that utilizes a lower-layer module, the Port Security module,
which manages MAC addresses learned on the port.
The Limit Control configuration consists of two sections, a system- and a port-wid. The IP Source Guard Static Binding
Entry and Table Status screens in Figure 4-9-64 & Figure 4-9-65 appear.
Figure 4-9-64 Port Security Setting Page Screenshot