Interlogix NS3500-28T-4S User Manual - Manual (Page 103)

103
Current Rx column indicates whether pause frames on the port are obeyed.
Current Tx column indicates whether pause frames on the port are transmitted.
The Rx and Tx settings are determined by the result of the last
Auto-Negotiation.
Check the configured column to use flow control.
This setting is related to the setting for Configured Link Speed.
Buttons
: Click to apply changes.
Figure 4-4-7 LAG Port Status Page Screenshot
The page includes the following fields:
Object Description

LAG The LAG for the settings contained in the same row.
 Description Display the current description.
 Port Type Display the current port type.
 Enable State Display the current enable state.
 Speed Display the current speed.
 Duplex Display the current duplex mode.
 Flow Control Config Display the current flow control configuration.
 Flow Control Status Display the current flow control status.