Interlogix NS3500-28T-4S User Manual - Manual (Page 297)

297
Figure 4-10-7 IP-based ACE Page Screenshot
The page includes the following fields:
Object Description
 ACL Name Select ACL name for this drop down list.
 Sepuence Set the ACL sequence.
 Action Indicates the forwarding action of the ACE.

Permit : Frames matching the ACE may be forwarded and learned.

Deny : Frames matching the ACE are dropped.

Shutdown : Port shutdown is disabled for the ACE..
 Protocol Specify the protocol filter for this ACE.

Any(IP) : No protocol filter is specified.

Select from list : If you want to filter a specific protocol with this ACE,
choose this value and select protocol for this drop down list.

Protocol ID to match : I If you want to filter a specific protocol with this
ACE, choose this value and set currect protocol ID.
 Source IP Address Specify the Source IP address filter for this ACE.

Any : No source IP address filter is specified.

User Defined : If you want to filter a specific source IP address with this
ACE, choose this value. A field for entering a source IP address value
appears.
 Source IP Address
Value
When "User Defined" is selected for the source IP address filter, you can enter
a specific source IP address. The legal format is "xxx.xxx.xxx.xxx". A frame that
hits this ACE matches this source IP address value.
 Source IP Wildcard
Mask
When "User Defined" is selected for the source IP filter, you can enter a specific
SIP mask in dotted decimal notation.
 Destination IP
Address
Specify the Destination IP address filter for this ACE.

Any : No destination IP address filter is specified.

User Defined : If you want to filter a specific destination IP address with
this ACE, choose this value. A field for entering a source IP address value
appears.
 Destination IP
Address Value
When "User Defined" is selected for the destination IP address filter, you can
enter a specific destination IP address. The legal format is "xxx.xxx.xxx.xxx". A