Interlogix NS3500-28T-4S User Manual - Manual (Page 244)

244
enabled port security on a port, the port is set-up for software-based learning. In this mode, frames from unknown
MAC addresses are passed on to the port security module, which in turn asks all user modules whether to allow this
new MAC address to forward or block it. For a MAC address to be set in the forwarding state, all enabled user modules
must unanimously agree on allowing the MAC address to forward. If only one chooses to block it, it will be blocked until
that user module decides otherwise.
The SSH Settings and Information screens in Figure 4-9-23 & Figure 4-9-24 appear.
Figure 4-9-23 SSH Settings Page Screenshot
The page includes the following fields:
Object Description
 SSH Service Disable or enable SSH service
 Login Authentication List Select login authentication list for this drop down list.
 Enable Authentication List Select enable authentication list for this drop down list.
 Session Timeout Set the session timeout value.
 Password Retry Count Set the password retry count value.
 Silent Time Set the silent time value.
Buttons
: Click to apply changes.
: Click to disconnect telnet communication.