Interlogix NS3500-28T-4S User Manual - Manual (Page 157)

157
 Edge Port Conf/Oper Display the current edge port conf/oper
 P2P MAC Conf/Oper Display the current P2P MAC conf/oper
 Port Role Display the current prot role
 Port State Display the current port state
4.6.6 MST Instance Configuration
This page allows the user to configure MST Instance Configuration. The MST Instance Setting, Information and Status
screens in Figure 4-6-12 , Figure 4-6-13 & Figure 4-6-14 appear.
Figure 4-6-12 MST Instance Setting Page Screenshot
The page includes the following fields:
Object Description

MSTI ID Allow assign MSTI ID. The range for the MSTI ID is 1-15.

VLAN List (1-4096) Allow assign VLAN list for special MSTI ID. The range for the VLAN list is
1-4094.
 Priority Controls the bridge priority. Lower numerical values have better priority. The
bridge priority plus the MSTI instance number, concatenated with the 6-byte
MAC address of the switch forms a Bridge Identifier.
Buttons
: Click to apply changes.