Interlogix NS3500-28T-4S User Manual - Manual (Page 86)

86
Figure 4-3-9 Port Mirroring Settings Page Screenshot
The page includes the following fields:
Object Description
 Session ID Set the port mirror session ID. Possible ID are: 1 to 4.
 Monitor Session
State
Enable or disable the port mirroring function.
 Destination Port Select the port to mirror destination port.
 Allow-ingress Frames from ports that have either source (rx) or destination (tx) mirroring
enabled are mirrored to this port.
 Sniffer TX Ports Frames transmitted from these ports are mirrored to the mirroring port. Frames
received are not mirrored.
 Sniffer RX Ports Frames received at these ports are mirrored to the mirroring port. Frames
transmitted are not mirrored.
Buttons
: Click to apply changes.