Interlogix NS3500-28T-4S User Manual - Manual (Page 229)

229
The page includes the following fields:
Object Description
 Port The switch port number of the logical port.
 Mode (pps) Display the current mode.
 Status (pps) Display the current status.
 Periodic
Reauthentication
Display the current periodic reauthentication.
 Reauthentication
Period
Display the current reauthentication period.
 Quiet Period Display the current quiet period.
 Supplicant Timeout Display the current supplicant timeout.
 Max. EAP Requests Display the current Max. EAP requests.
 Modify
Click to edit 802.1X port setting parameter.
4.9.1.4 Guest VLAN Setting
Overview
When a Guest VLAN enabled port's link comes up, the switch starts transmitting EAPOL Request Identity frames. If
the number of transmissions of such frames exceeds Max. Reauth. Count and no EAPOL frames have been received
in the meantime, the switch considers entering the Guest VLAN. The interval between transmission of EAPOL
Request Identity frames is configured with EAPOL Timeout. If Allow Guest VLAN if EAPOL Seen is enabled, the port
will now be placed in the Guest VLAN. If disabled, the switch will first check its history to see if an EAPOL frame has
previously been received on the port (this history is cleared if the port link goes down or the port's Admin State is
changed), and if not, the port will be placed in the Guest VLAN. Otherwise it will not move to the Guest VLAN, but
continue transmitting EAPOL Request Identity frames at the rate given by EAPOL Timeout.
Once in the Guest VLAN, the port is considered authenticated, and all attached clients on the port are allowed access
on this VLAN. The switch will not transmit an EAPOL Success frame when entering the Guest VLAN.
While in the Guest VLAN, the switch monitors the link for EAPOL frames, and if one such frame is received, the switch