Interlogix NS3500-28T-4S User Manual - Manual (Page 293)

293
this ACE, choose this value. A field for entering a DA MAC value appears.
 DA MAC Value When "User Defined" is selected for the DA MAC filter, you can enter a specific
destination MAC address. The legal format is "xx-xx-xx-xx-xx-xx". A frame that
hits this ACE matches this DA MAC value.
 DA MAC Mask Specify whether frames can hit the action according to their sender hardware
address field (SHA) settings.

0
: ARP frames where SHA is not equal to the DA MAC address.

1
: ARP frames where SHA is equal to the DA MAC address.
 SA MAC Specify the source MAC filter for this ACE.

Any : No SA MAC filter is specified.

User Defined : If you want to filter a specific source MAC address with this
ACE, choose this value. A field for entering a SA MAC value appears.
 SA MAC Value When "User Defined" is selected for the SA MAC filter, you can enter a specific
source MAC address. The legal format is "xx-xx-xx-xx-xx-xx". A frame that hits
this ACE matches this SA MAC value.
 SA MAC Mask Specify whether frames can hit the action according to their sender hardware
address field (SHA) settings.

0
: ARP frames where SHA is not equal to the SA MAC address.

1
: ARP frames where SHA is equal to the SA MAC address.
 VLAN ID Indicates the ID of this particular VLAN.
 802.1p Include or exclude the 802.1p value
 802.1p Value Set the 802.1p value.
 802.1p Mask 
0
: where frame is not equal to the 802.1p value.

1
: where frame is equal to the 802.1p value.
 Ethertype
(Range:0x05DD –
0xFFFF)
You can enter a specific EtherType value. The allowed range is 0x05DD to
0xFFFF . A frame that hits this ACE matches this EtherType value.
Buttons
: Click to add ACE list.