Interlogix NS3500-28T-4S User Manual - Manual (Page 44)

44
The page includes the following fields:
Object Description

Mode Indicates the IP address mode operation. Possible modes are:
Static : Enable NTP mode operation.
When enable NTP mode operation, the agent forward and to transfer NTP
messages between the clients and the server when they are not on the
same subnet domain.
DHCP : Enable DHCP client mode operation.
Enable the DHCP client by checking this box. If DHCP fails and the
configured IP address is zero, DHCP will retry. If DHCP fails and the
configured IP address is non-zero, DHCP will stop and the configured IP
settings will be used. The DHCP client will announce the configured
System Name as hostname to provide DNS lookup.

IP Address Provide the IP address of this switch in dotted decimal notation.

Subnet Mask Provide the subnet mask of this switch dotted decimal notation.

Gateway Provide the IP address of the router in dotted decimal notation.

DNS Server 1/2
Provide the IP address of the DNS Server in dotted decimal notation.
Buttons
: Click to apply changes.
Figure 4-2-3 IP Information Page Screenshot
The page includes the following fields: