Interlogix NS3500-28T-4S User Manual - Manual (Page 173)

173
The page includes the following fields:
Object Description

VLAN ID Display the current VLAN ID.
 Querier State Display the current querier state.
 Querier Status Display the current querier stauts.
 Querier Version Display the current querier version.
 Querier IP Display the current querier IP.
4.7.2.3 IGMP Static Group
Multicast filtering can be dynamically configured using IGMP Snooping and IGMP Query messages as described in
above sections. For certain applications that require tighter control, you may need to statically configure a multicast
service on the Managed Switch. First add all the ports attached to participating hosts to a common VLAN, and then
assign the multicast service to that VLAN group.
- Static multicast addresses are never aged out.
- When a multicast address is assigned to an interface in a specific VLAN, the corresponding traffic can only be
forwarded to ports within that VLAN.
The IGMP Static Group configuration screens in Figure 4-7-12 & Figure 4-7-13 appear.
Figure 4-7-12 Add IGMP Static Group Page Screenshot