4 lacp setting – Interlogix NS3500-28T-4S User Manual User Manual
Page 104
Advertising
![background image](/manuals/679208/104/background.png)
104
4.4.4 LACP Setting
This page is used to configure the LACP system priority setting. The LACP Setting screens in
Figure 4-4-8
&
Figure
4-4-9
appear.
Figure 4-4-8
LACP Setting Page Screenshot
The page includes the following fields:
Object
Description
System Priority
A value which is used to identify the active LACP. The Managed Switch with the
lowest value has the highest priority and is selected as the active LACP peer of
the trunk group.
Buttons
: Click to apply changes.
Figure 4-4-9
LACP Information Page Screenshot
The page includes the following fields:
Object
Description
System Priority
Display the current system priority.
Advertising