Interlogix NS3500-28T-4S User Manual - Manual (Page 287)

287
The page includes the following fields:
Object Description
 Unit Controls the unit of measure for the storm control rate as "pps" or "bps". The
default value is "bps".
 Preamble & IFG Set the excluded or included interframe gap
Buttons
: Click to apply changes.
Figure 4-9-70 Storm Control Global Information Page Screenshot
The page includes the following fields:
Object Description
 Unit Display the current unit.
 Preamble & IFG Display the current preamble & IFG.
4.9.12.2 Port Setting
Storm control for the switch is configured on this page. There are three types of storm rate control:
 Broadcast storm rate control
 Unknown Unicast storm rate control
 Unknow Multicast storm rate contro.l
The configuration indicates the permitted packet rate for unknown unicast, unknown multicast, or broadcast traffic
across the switch. The Storm Control Configuration screens in Figure 4-9-71 & Figure 4-9-72 appear.